How To Make A Stringless G-String Bikini Bottom
1 comfortable all metal buttplug
coated steel wire hanger
drill bit that lays threads (optional)
white cotton jersey
your choice of swimming spandex
Gorilla Super Glue
Gorilla Super Glue
Lube if desired
Wire Snips
White, Black or Matching Embroidery thread
Hot Glue Gun
Remove the jewel on the top of the buttplug
If there is already a hole under the jewel, omit the drilling.
If there is no hole, then you have to drill one with the metal self tapping drill bit, (be careful and slow)
Measure the distance from your anus to your vaginal opening, then measure from the vaginal opening to the top of the area you want to cover.
Combine both numbers. Add 1-1/2 inches.
Example 10-1/2 inches
Gut off the swirled part of the hanger and the hanger part.
Bend the center of the straight part to form the part that goes over your pubic area.
Then measure from the side down the measurement above. do this for both sides.
Cut the excess off.
Fill the hole you made with Gorilla Glue,
Put the ends of the wire together straight.
And Push this into the hole as far as it will go.
Let dry and harden
Then spread out the wire carefully at the base near the plug to adequately cover your vaginal opening.
Make a paper pattern from the final wire measurement
Adding 1/2 inch all around for the seam allowance
SAVE THIS PATTERN FOR WHEN YOU WANT TO SWAP IT OUT FOR A NEW COLOR OR IT GETS DIRTY.
Use this to cut out the spandex
and the absorbent cotton liner
Wire Snips
White, Black or Matching Embroidery thread
Hot Glue Gun
Remove the jewel on the top of the buttplug
If there is already a hole under the jewel, omit the drilling.
If there is no hole, then you have to drill one with the metal self tapping drill bit, (be careful and slow)
Measure the distance from your anus to your vaginal opening, then measure from the vaginal opening to the top of the area you want to cover.
Combine both numbers. Add 1-1/2 inches.
Example 10-1/2 inches
Gut off the swirled part of the hanger and the hanger part.
Bend the center of the straight part to form the part that goes over your pubic area.
Then measure from the side down the measurement above. do this for both sides.
Cut the excess off.
Fill the hole you made with Gorilla Glue,
Put the ends of the wire together straight.
And Push this into the hole as far as it will go.
Let dry and harden
Then spread out the wire carefully at the base near the plug to adequately cover your vaginal opening.
Adding 1/2 inch all around for the seam allowance
SAVE THIS PATTERN FOR WHEN YOU WANT TO SWAP IT OUT FOR A NEW COLOR OR IT GETS DIRTY.
Heres the actual "suit" LOL
Use the embroidery thread to sew the "suit" to the metal frame at top, then down both sides, carefully sewing in the liner,
When you get to the part near the plug, do 3 stitches at the bottom then wrap the thread around the wires, tightly and tie a knot.
coat with hot glue smoothly.
Let cool.
To wear, Lube up, bend the wire to fit the sharp curve, fit the plug inside and adjust the wire to fit snuggly and cover.
Do you dare wear it out?
Use the embroidery thread to sew the "suit" to the metal frame at top, then down both sides, carefully sewing in the liner,
When you get to the part near the plug, do 3 stitches at the bottom then wrap the thread around the wires, tightly and tie a knot.
coat with hot glue smoothly.
Let cool.
To wear, Lube up, bend the wire to fit the sharp curve, fit the plug inside and adjust the wire to fit snuggly and cover.
Do you dare wear it out?
No comments:
Post a Comment